High Speed
Wind Stable
Durable Build
Power Efficient
Skip to product information
Rs. 20,000.00
KD5 is a 5" quad designed to carry an action camera or just an O4 Pro. It places motors inside the arms for the lowest profile 5" possible, and has a unique I-beam design made of vertical arms clamped between two continuous plates. This creates an insanely strong and stiff structure, while packing a huge number of features into an only 95g frame. The weight and efficient design allow up to 9 minute flight times with an action camera.
KD5 has no props in view on the O4 Pro at any angle, and no props in view on an Action 5 down to about 10 degrees. It has a GPS mount in the middle that's isolated from everything else, and antenna mounting for ideal separation. The battery is bottom mounted with dual straps for easy hand launch/catch, and lower moment of inertia for better performance. It even has 30.5 x 30.5 mm KDCM Lite mounting holes on top for flying larger payloads. It's a very tight build with only 15mm height internally, yet still has space for a full stack, VTX, GPS, diversity Rx, and capacitor.
YouTube Video: Overview - Flight Footage - Build Guide
Specs:
Weight: 95g (no action camera mount)
Size: 178 x 208 x 22 mm
Mounting:
- O4 Pro, Action camera, KDCM Lite (30.5 x 30.5 M3 holes with press nuts)
- 30.5 x 30.5, 20 x 20 M3 stack mounting
- 20 x 20, 25.5 x 25.5 M2 VTX mounting
- Capacitor and VTX zip tie slots
- 16 x 16 Motor pattern
Frame kit includes:
- T700 Carbon: 1x top plate, 1x bottom plate, 4x arms
- Hardware
- Motor screws and washers
- FC/ESC screws and thin nuts
- 3D Prints
- Mounted XT60
- 2x 250mm battery straps
- Battery pad
- STLs and a Betaflight 4.5 tune can be downloaded for free from the KD5 GrabCAD page. The tune is used at your own risk and is not recommended for use. See below to get your own tune.
Recommended Parts (not included):
- 2207 1700kv Xnova motors, or any good 5" motor less than 29mm wide
- Iflight F5 props, or your favourite 5" prop
- HGLRC Spectre F405 stack, or any stack that can fit into the 15mm build height
- 6s 1400-2000 mAh Lipo
- DJI O4 Pro, DJI O3
- Foxeer M10Q 180 GPS, or TBS M10 GPS (get STL from the GrabCAD for this print)
- KDCM Lite (only for mounting larger payloads)
- Custom PIDtoolbox tune, available here: https://ptblabs.c
Product Detail
Return policy
Our goal is for every customer to be totally satisfied with their purchase. If this isn't the case, let us know and we'll do our best to work with you to make it right.
Shipping
We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.
Manufacturing
Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.
See the world differently
Your sky, your story.
